商品詳情

MP 高端反擊式破碎機 MP  High-End Impact Crusher

 

一、産品簡介Product Description

 

美斯拓高端 MP 系列反擊式破碎機是重型化轉子設計 , 高耐磨材料以及破碎腔設計完美的結合。這種結合🌐被證✌️明🚶‍♀️是革命性的 , 它不但提高了生産能力和産品質量 , 而且降低了生産成本和磨損部件的消耗。該系列反擊🐆式破碎機經過更優化設計 , 破碎腔更大 , 給料粒度更大 : 而且通過優化襯闆和特定的轉子 , 提高了各種應用條件下的生産效率。對于轉子設計的不懈努力 , 增大了轉動慣量 , 提高了設備産量 , 獲得更大的破碎比。因而 , MP 系列反擊式破碎機實現了以較少的破碎段數 , 獲得較大的破碎比 , 降低投資成本 , 節約能源。

 

Mesto MP high-end impact crusher ultimate combination of heavy rotor's design,high strength wear-resistant materials and crushing chamber's perfectly designed. This combination is revolutionary, it's not only improve the capacity and proctuct’s quality, but also reduce the production cost and wear parts 's consume. This series's impact crusher after more optimization design, crushing cavity is bigger, feeding size also bigger then before. By Optimization of lining board and Specific rotor, Improve the production efficiency in all kinds of application condition, Untiring effort to design the rotor, Increased moment of inertia, improve equipment's production, get greater ratio of crushing. So MP series impact crusher achieved less process,greater crushing ratio, reduce the cost of investment and energy saving.

 

二、 産品特點 Product Features

 

·極高的破碎比 ;

·極佳的成品立方體形狀 , 滿足瀝青和混濕土産品規範對針片狀含量的要求 :

·較其他機型 , 更适于處理粘性物質 ;

·廣泛的通用性 -- 适用于采石和砥石 , 水泥 , 混泥土與瀝青回收利用和礦 , 回收利用等作業

 

· Extreme crushing ratio..

· Excellent cube shape of finished product ,satisfy the needle flake content requirements of asphalt and concrete product specification.

· Compare other type,more suitable for deal with stickum..

· Wide universality--is suitable for quarrying and gravel,cement,concrete and asphalt's recycle and slag recycle etc.

三、 技術參數  Technical Data

型号 Model	進料口尺寸 Size of feed opening	最大進料粒度 Max.Feed Size	轉子直徑 Rotor diameter	主軸轉速Rotor Speed	處理量 Capacity	電機功率 Motor Power	重量 Weight	外形尺寸 Dimension
	(mm×mm)	(mm)	（mm）	(r/min)	(t/h)	（Kw）	（t）	(L×W×H）(mm)
MP-200	1350×930	750	1200	700	200-250	160-200	20.6	3570×2410×2830
MP-300	1480×972	950	1300	700	350-400	200-250	23.21	3710×2410×2940
MP-400	1550×1100	1200	1500	450	580-675	320-440	36	4150×3495×3370
MP-500	2000×1680	1500	1600	450	820-1010	440-500	45	4250×3995×3370
BP-250	1320×880	500	1200	700	225-340	160-200	17.63	2809×2529×2041
BP-350	1540×930	600	1300	700	280-400	250-320	22.5	3265×2750×2221
BP-450	2040×995	600	1300	700	400-670	320-400	27.33	3265×3250×2221